A brief introduction of PVC industrial gloves

For the classification of gloves, there are many classifications according to different standards. Among them, dipped gloves are a kind of rubber gloves, and dipped gloves are a kind of dipped gloves. PVC safety gloves are coated with oily gelatin, so the palms will feel greasy during use, especially under sweating conditions. This is the normal precipitation of grease. With the improvement of economic conditions, consumers` perceptions are slowly changing. Consumers have switched to other water-based coatings and gradually abandon the PVC protective gloves with excellent abrasion resistance. In summary, the characteristics of PVC protective gloves in use are introduced in detail to ensure the quality of brand PVC protective gloves. The characteristics of red oil-resistant gloves are: very sensitive; the outer cotton pad increases the comfort; the improved technology increases The resistance of the gloves to chemicals and abrasion. Most of the dipped gloves are palm dipped or semi-dipped, and the back of the hand is open back. This operation is mainly for the factory to reduce costs, because the glove is used to touch the palm and the object, and the back of the hand rarely participates in the labor process. There is no rubber covering on the back of the gloves. It is generally believed to increase the air-breathability of the gloves. Although the air permeability is increased compared with the fully dipped gloves, the effect is general, because the sweat of the hands is mainly on the palms. To completely solve the problem of palm air permeability, dipped gloves can only be improved on the dipped coating. The most commonly used method is foaming. If the common foaming hand in the market is latex foaming gloves, of course, nitrile can also be used for factory foaming gloves, but the market popularity is average. Latex foam gloves basically solve the problem of air permeability, because the glue has changed, and the wear resistance is relatively poor.

Oil-resistant protective gloves for workshop production. The surface of the dipped gloves is made of raw materials such as ring resin powder. It has excellent oil resistance, has good resistance to various oils, and is especially suitable for working in oily environments. PVC oil-resistant protective gloves are used to protect hand skin from various allergic symptoms caused by oily substances, such as skin itching, acute dermatitis, acne, folliculitis, dry skin, cracked skin, body pigmentation and nail damage. Chemical acid and alkali resistant gloves, PVC safety gloves have good acid and alkali resistance, and can resist the erosion of various strong acids, strong alkalis and general chemicals. These protective gloves can prevent the damage of extreme chemicals, and their quality should comply with the relevant national regulations on industrial safety production. Anti-acid and alkali protective gloves require non-leakage performance, that is, they must be sealed, and air leakage is not allowed under a certain pressure.